Key Features
12″ two-way bi-amplified active loudspeaker
800 watts Continuous power
1600 watts Peak power
90° x 45° dispersion
2″ HF Compression driver
3″ LF voice coil
Advanced Internal FIR DSP 
130.5 dB Max SPL @ 1 meter

Specifications
System Type    Active : 12” 2-way Bi-Amplified
Frequency Response (+/-3 dB) : 60 Hz – 20 KHz
Frequency Range (-10 dB) : 55 Hz – 20 KHz
Calculated Maximum SPL @1m : 130.5 dB
Low Frequency Transducer – Size ( mm / inches) : 332 mm / 12″
Coil Size ( mm / inches) : 75 mm / 3″
Impedance : 4 Ω
High Frequency Transducer – Type : Compression Driver
Coil Size ( mm / inches) : 51.2 mm / 2″
Exit Size ( mm / inches) : 35.6 mm / 1.4″
Diaphragm Material : Titanium
Impedance : 8 Ω
Nominal Coverage (H x V) : 90° x 45°

Amplifiers    
Amplifier Design : Class D
Power Rating : 1600 W Peak (1400 W LF + 200 W HF), 800 W Continuous (700 W LF + 100 W HF)
Power On Protection : Power Switch On/Off Mute
Thermal Protection : Amplifier Shut Down. Auto Reset
Low Line Voltage Shut Down : 80% Nominal Line Voltage
Driver Protection : Independent LF and HF Limiters
DC and Short Protection : Yes
Clip Limiter : Turns on Approx 600 W Output
Limiter Indicator : Red LED
Power Indicator : Green LED

Connectors    
Input A – type : Switchable Balanced Mic or Line Level Input
Input Sensitivity : Mic:-40 dBu Line:0 dBu
Maximum Input Level : 22 dBu
Input Connector : XLR 1/4〞Combo jack / 2 x RCA
Input Impedance : Balanced:20 KΩ Unbalanced:10 KΩ
Line Output Connector : Switchable LOOP/MIX Balanced pin XLR Connector
Impedance Balanced : Balanced: 200 Ω Unbalanced:100 Ω
Loop Gain : Mic:69 dB, Line:29 dB
AC Power details – Power Supply : High Efficiency Switching Mode Power Supply
AC Power Options : AC100-120 V~/220-240 V~,50/60 Hz
Hardware – Rigging : M10 x 6
Pole Mount : Dual Angle (0⁰ or 10⁰) 35 mm Pole Socket
Enclosure Material and finish : 15 mm Plywood
Colour Options : Black Rhino Paint
Grille Material & Finish : 1.5 Steel